Artopex e-Motion Kullanıcı Kılavuzu - Sayfa 4
İç Mekan Mobilyaları Artopex e-Motion için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Artopex e-Motion 10 sayfaları. Two-leg adjustable table
Sayfayı Yazdır
Reset and Memory Settings
Reset (Initialization)
Clear any obstructions below the surface. Press and hold the DOWN button on the keypad until the
table reaches its lowest height, stops, and rises slightly again. The display will momentarely indicate
"rES" and then indicate the actual height. The table has been reset and is now ready to use.
Procedure to raise or lower the work surface
After reset, press and hold the UP button, lifting column will rise, release to stop at the desired height.
After reset, press and hold the DOWN button, lifting column will lower, release to stop at the desired
height.
Setting memory positions
Position the work surface using the UP/DOWN button to desired height, press M button first, then
press button 1, 2, 3 or 4.
When setting the memory positions, ensure there is at least a 1'' (25 mm) space
left between the work surface and any obstacle (such as chair armrests).
To raise or lower the work surface to a programmed position, press one of the four previously
programmed positions (1, 2, 3 or 4). The work surface will raise or lower to the programmed position.
Lock/Unlock Keypad
Lock: Press simultaneously the UP and DOWN buttons for 5 seconds; keypad will lock and Loc will be
displayed (flashing).
Unlock: Keep pressing simultaneously the UP and DOWN buttons for 5 seconds, to unlock the keypad.
Keypad will display current height
1 800 378-0189
4