DLC PD030 Manuel - Sayfa 10

Tıbbi Ekipman DLC PD030 için çevrimiçi göz atın veya pdf Manuel indirin. DLC PD030 18 sayfaları. 30w diode laser surgical system

PD030 DIODE LASER MANUAL

4. Operation Instructions continued.

c. Output time setting

There three ways of output:

Free output: The laser emits when footswitch is pressed, it is also called real-time

output.

Pre-set pulse amount: Input the amount of pulses need to output. When the

footswitch is pressed, the laser emits pulse of the amount you set.

Pre-set time: Estimate and then input the treatment time. When the footswitch is

pressed, the laser emits for the time you set.

Caution: Pre-set pulse and Pre-set time are designed for experienced users.

We strongly recommend that new users use free output.

Press the output mode you want and set the value(same as detail parameter setting), then

press "Enter" to confirm.

4.4 Change Status and Emit

After all parameters are set and confirmed, press "Ready" to switch to ready status, the

parameters will be locked.

Then press the footswitch, laser will emit as you set.

If you want to change parameters, press "Stand by" to switch to stand-by status.

DLC Australia Pty Ltd 10

Time Parameter Area

Output Area