DLX XW-70 Manuel - Sayfa 7

Isıtıcı DLX XW-70 için çevrimiçi göz atın veya pdf Manuel indirin. DLX XW-70 10 sayfaları.

/ /

S H UT-DOW N PROC EDU RES

SWITCHING OFF THE HEATER

The heater turns off by flipping the power switch from "ON" to "OFF". The burner box will turn off, and the fan will continue running to cool off the burner

box. Do not unplug the heater until this cooling cycle has totally ended. This may take up to 5 minutes. Once the heater has completely cooled down

and the unit is unplugged, ensure that the fuel tank cap is properly closed to prevent fuel leakage during transport and/or storage. To keep the heater in

the best possible conditions, store the heater in a dry and safe place after cleaning the fuel tank.

RESETTING THE HEATER

The appliance stops when an anomaly occurs. If the reset button turns on with a steady red light it means the heater needs to be reset.

To reset the heater:

1. Press the reset button

2. Identify and remove the cause that stopped the appliance (obstruction of air intake and/or outlet, obstruction to the free rotation of fan, etc.)

3. Please contact Deployed Logix or an appointed service center for assistance if problem persists.

STORAGE AND TRANSPORT

1. Empty the fuel by removing the drain cap at the bottom of the tank.

2. Dispose the fuel in an appropriate container in accordance with the current safety regulations.

3. To remove any remaining residue pour clean fuel and rinse the tank again.

4. Close the drain cap and the tank cap.

5. In order to keep the heater in the best possible conditions, store in a dry and safe place.

/ / / /

DE PL O Y EDL OG I X. COM / /

@ DEPL OYEDL OGIX // EM AIL: SAL ES@ DEPL O YE DL OG IX.C OM // P : 5 41 . 35 7 . 59 7 8