Et ET1000 Montajcı Talimatları - Sayfa 2
Kapı Açıcı Et ET1000 için çevrimiçi göz atın veya pdf Montajcı Talimatları indirin. Et ET1000 13 sayfaları. Sliding gate operator commercial/industrial 1000kg mass
Sayfayı YazdırWARNING TO THE INSTALLER. GENERAL SAFETY
OBLIGATIONS.
Caution! It is important for personal safety to follow all the instructions carefully. Incorrect
installation or misuse may cause serious personal harm.
Keep the instructions in a safe place for future reference.
This product was designed and manufactured strictly for the use indicated in this
documentation. Any other use not expressly indicated in this documentation, may
damage the product and/or be a source of danger.
We accept no responsibility due to improper use of this product.
Care must be taken not to install this product in an unsafe environment. I.e. near
inflammable gases and or fumes.
We will not accept responsibility if the principles of good workmanship are disregarded by
the installer. The construction of the gate must be sound and automatable. It is the
responsibility of the installer to ensure that all mountings to the gate are sufficient to
withstand the necessary forces incases of overload.
Before carrying out any work on the product, ensure that the electrical supply is switched
off.
It is highly recommended that a set of safety infra red beams be used in conjunction with
this product.
We accept no responsibility regarding safety and correct operation of the automation if
other manufacturer's equipment is added to this product.
Do not make any modifications or alterations to this product.
It is the responsibility of the installer/ service provider to completely instruct and
demonstrate the proper use of this product, especially the emergency override, to the end
user. It is also the responsibility of the installer/ service provider to issue all end user
documentation, which accompanies this product, to the end user.
Ensure that other persons, especially children are clear of the gate and opener before and
during operation.
Keep remote transmitters away from children to prevent accidental activation of the
system.
The end user should refrain from attempting to make any repairs or adjustments to the
system and should contact professional qualified assistance timorously.
Anything other than expressly provided for in these instructions is not permitted.
The electrical supply to this product must comply with the local electrical code of practice
and any electrical work must be carried out by a qualified electrician.
Over and above the recommendation to use safety infra red beams with this product it is
mandatory to ensure a set has been installed and is in proper working condition when
using the automatic closing feature.
2