Akoma Pet Products Hound Heater Manuel - Sayfa 3

Isıtıcı Akoma Pet Products Hound Heater için çevrimiçi göz atın veya pdf Manuel indirin. Akoma Pet Products Hound Heater 4 sayfaları.

Installation & Maintenance

Installation:

Tools Required:

1. Measuring device

2. Drill

3. 1-1/8" wood drill bit

4. Screw driver

5. Three wood screws (not included).

Make sure Pet is removed from pet house prior to installation.

Step 1...

The Hound Heater™ must be mounted on a vertical

wall of your pet house. Do not mount on the ceiling or floor. Place

the heater as high as possible with a minimum of at least 3 inches from

the ceiling. Do not place heater near floor of pet house.

Step 2....

Using the 1-1/8" drill bit, drill a hole through the wall of

your pet house (a minimum of 9" from the ceiling) where the center of

the Hound Heater will be placed and the power cord will go through.

Step 3....

Carefully feed the cord all the way through the previously

drilled hole making sure the cord is not kinked.

Step 4....

Mount the heater with the temperature control knob

towards the ceiling and the slant towards the floor using three wood

screws or nuts and bolts. Lightly tuck the filter (included in box) in the

space between the heater and the wall - behind the temperature control

knob. This will help dog hair, dirt and dust from getting in the heater and

improve functionality.

Step 5 ...

Plug the unit into a GFI outlet and you are done. If you are using

an extension cord, it must be a 3 wire, 18 gauge (outdoor rated) grounded plug

cord. Be sure the connection is elevated off any surface and not near water.

Maintenance:

Regular maintenance is important to the functionality and safety of the unit.

1. The filter must be cleaned at least once per month to keep unit in safe and

operable condition. To clean the filter, remove it from the unit and blow air or

water through the filter until it is clean. Return the filter once it is dry to the unit.

2. During regular maintenance, remove front cover and inspect for hair, dust, and debris.

Ensure the fan is free from hair, dust, and debris and is able to move freely. To clean, we

recommend wiping it out with a lint free towel and/or a soft bristled brush.

Please note that maintenance requirements may vary depending on factors such as

increased exposure to hair and other particulates.