FlavorChef EP0030K Kullanıcı Kılavuzu - Sayfa 13

Mutfak Aletleri FlavorChef EP0030K için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. FlavorChef EP0030K 16 sayfaları. Express kitchen system

Sayfayı Yazdır

4. Gently and carefully use the grip holes to line up the Dice & Chip Attachment grooves with the protrusions in

the Master Jar (see e. below).

WARNING

THE BLADES ARE EXCEPTIONALLY SHARP. HANDLE WITH CARE.

5. The Dice & Chip Attachment is fitted correctly when (i) the silver spindle is protruding through the central

knob (see f. below); (ii) the arrow on the periphery of the Dice & Chip Attachment is aligned with the centre of

the handle (see g. below); and (iii) the grooves under the attachment fit snugly in the protrusions of the

Master Jar (see e. below).

6. Connect the Lid to the Master Jar.

NOTE: If you cannot connect the lid to the Master Jar, you have not fitted the Dice & Chip Attachment correctly.

Place the food to be processed into the Chute, and using the Pusher Tool move the food down the Chute

towards the Dice & Chip Attachment.

WARNING

USE ONLY THE PUSHER TOOL TO MOVE FOOD DOWN THE CHUTE. NEVER USE YOUR FINGERS

FOR THIS PURPOSE AS SERIOUS PERSONAL INJURY CAN OCCUR.

NOTE: Use gentle force when pressing down on the food Pusher. Excessive force could cause damage to the

the Dice & Chip Attachment.

NOTE: Do not exceed the "MAX Solid" line marking when loading food to be chopped into the Master Jar.

8. Turn the unit on.

9. Recommended setting for dicing/chipping: 1

NOTE: The total operating time should not be longer than 2 minutes.

Suggested Use

• Dicing Insert: Salsa

• Chipping Insert: Mini Potato Chips

Chopping

(Red)

Master Jar

Multi-Base

IMPORTANT

Make sure the unit is turned off and unplugged before use. You can plug it in only once all the

parts are assembled.

Connect the Multi-Base to the Master Jar (see "Connecting/Disconnecting Bases").

2. Connect the Master Jar (with Multi-Base) to the Motor Housing (see "Connecting the Master Jar to the Motor Housing").

Connect the Spindle to the Multi-Base (see a. below).

4. Place the Chopping Blade on top of Spindle (see b. below).

WARNING

THE CHOPPING BLADE IS VERY SHARP, USE EXTREME CAUTION WHEN HANDLING.

5. Place food to be chopped inside Master Jar.

NOTE: Do not exceed the "MAX Solid" line marking when loading food to be chopped into the Master Jar.

Connect the Lid to the Master Jar and ensure the Pusher is inserted into the Chute to prevent the contents

from escaping (see c. below).

Turn the unit on.

8. Recommended setting for Chopping: "P" or 2

NOTE: The total operating time should not be longer than 1 minute.

The Pulse setting should not be used for longer thane 3-5 seconds at a time.

Suggested Use

• Salsa (alternatively use the

• Ice Crushing

Multi-Cut Disc)

• Chopping onion

• Finely chopping meats

• Pesto

Spindle (Black)

Chopping Blade

Motor Housing