FlavorChef EP0030K Kullanıcı Kılavuzu - Sayfa 14

Mutfak Aletleri FlavorChef EP0030K için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. FlavorChef EP0030K 16 sayfaları. Express kitchen system

Sayfayı Yazdır

Dough Making

(Red)

Tip

Do not exceed 300g/0.66lb of flour.

Master Jar

Multi-Base

IMPORTANT

Make sure the unit is turned off and unplugged before use. You can plug it in only once all the

parts are assembled.

1. Connect the Multi-Base to the Master Jar (see "Connecting/Disconnecting Bases").

2. Connect the Master Jar (with Multi-Base) to the Motor Housing (see "Connecting the Master Jar to the Motor Housing").

3. Connect the Spindle to the Multi-Base (see a. below).

4. Place the Dough Blade onto the Spindle (see b. below).

5. Place ingredients inside the Master Jar

IMPORTANT

Never try to process dough that is too stiff to knead comfortably by hand.

6. Connect the Lid to the Master Jar and ensure the Pusher is in place to prevent contents from escaping

(see c. below).

USE ONLY THE PUSHER TOOL TO MOVE FOOD DOWN THE CHUTE. NEVER USE YOUR FINGERS

WARNING

FOR THIS PURPOSE AS SERIOUS PERSONAL INJURY CAN OCCUR.

IMPORTANT

All liquid ingredients should be added through the Chute while the unit is processing. The liquid should

be added in a slow, steady stream for even distribution. It is important to add enough liquid to make dough soft

enough to knead. Kneading dough that is too stiff can strain the motor

and possibly cause burn out.

Turn the unit on.

8. Recommended setting for Dough Making: 2

NOTE: The total operating time should not be longer than 2 minutes.

Spindle (Black)

Dough Blade

Motor Housing

Dice and Chip

(Purple)

Optional Attachment

Tip

For best results, use firm vegetables for dicing and chipping.

When dicing tomatoes, remove the skin to expose the flesh.

There will be some debris left on the Dice & Chip Attachment after use. This is normal.

Master Jar

Dice & Chip Base

WARNING

THE BLADES ARE EXCEPTIONALLY SHARP. HANDLE WITH CARE.

Using the Dice & Chip Attachment

IMPORTANT

Make sure the unit is turned off and unplugged before use. You can plug it in only once all the

parts are assembled.

Connect the Dice & Chip Base to the Master Jar (see "Connecting/Disconnecting Bases").

2. Connect the Master Jar (with Dice & Chip Base) to the Motor Housing (see "Connecting the Master Jar to

the Motor Housing").

3. Prepare the Dice & Chip Attachment:

3.1.

Select either the Dicing Blade or Chipping Blade and place it into the Dice & Chip Attachment

(see a. below).

Both the Dicing and Chipping Blades can only be placed into the Dice & Chip Attachment in one way

IMPORTANT

so that the angled corners match.

3.2. Grip the central knob of the horizontal cutting blade and place it through the gaps in the periphery

of the Dice & Chip Attachment (see b. below).

WARNING

THE BLADES ARE EXCEPTIONALLY SHARP. HANDLE WITH CARE.

3.3. Gently turn the central knob of the horizontal cutting blade so that the one end of the blade is

aligned with the arrow on the periphery of the Dice & Chip Attachment (see c. below).

3. Place the Dice & Chip Attachment into the Master Jar by gripping the central knob and positioning it

onto the spindle of the Dice & Chip Base and aligning the dicing (or chipping) blade and the arrow with the

handle of the Master Jar (see d. below).

Pusher*

Chipping

Blade*

Dicing

Blade*

Dice & Chip

Attachment*

Motor Housing