Etabeta electronics NT-16 Kullanım Talimatları Kılavuzu - Sayfa 8

Müzik Mikseri Etabeta electronics NT-16 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Etabeta electronics NT-16 18 sayfaları.

Sayfayı Yazdır

Features - Front panel

1. Channel COMP/ limiter

1). This knob can adjust the threshold size of the pressure limiter. When the pressure limiter switch is

opened, the adjustment is effective.2). In button is to open and close the limiter.

2. Channel EQ/ Equalizer

1). Equalizer parameter knob

Up to down means: gain, frequency and Q value.

2). Parameter equalizer button

The shortcut keys of the parameter equalizer are: treble, medium treble, medium, bass and bass (from

top to bottom). After lighting the corresponding keys, match the three parameters on the left

Adjust the knob to adjust the EQ parameters,

Note: EQ adjustment is only effective when the EQ switch (ON key) is turned ON.

3. channel HPF/LPF(high-low pass filter)

1).(HPF) high pass knob/high pass switch

Adjust this knob to reduce the low frequency signal, HPF button is high frequency on and off.

2).(LPF) Low Pass Knob/Low Pass Switch

Adjust this knob to reduce the high frequency signal, LPF button is low pass frequency on and off.

The high-low pass filter can be treated as a frequency divider

4. Input channel GATE/ noise GATE

This knob can adjust the threshold size of the noise door. The IN button is to open and close the noise

door.

5. Input channel gain/audiovisual control knob

1). Gain control

Adjust this knob to increase or decrease the input signal level.

2). Audio and video control knob

Controls the proportion of signals sent from the current channel to the main output L channel and R

channel.

6. Channel signal routing and sending

1). The current channel signal is sent to the main output channel L and channel R ( just light up).2). The

current channel signal is sent to the marshalling output SUB1-2( just light it up).

7. Channel signal indicator light

1).PK peak indicator

This is used to indicate that the channel's signal is approaching distortion (restricted).

2).0 signal indicator light

The light is on, indicating that there is a signal input on this channel.

3).SIG signal indicator

The light is on, indicating that there is a signal input on this channel.

8. channel selection key/mute key/listening key

1).SEL channel selection key

The button lights up to indicate that a channel has been selected and that channel parameters can be

edited.

2).ON mute switch

Channel mute switch. When off, it means the channel is in mute state and you will not hear the signal of

the channel

3).PFL monitor switch

When this button is pressed, the signal will be output from the listener and the headset.

9. Passage pushers

This is used to control the level on the current channel (electric push).

10. Main output push

Used for adjusting the size of the hybrid main output level (electric push).