akpo WK-7 Manuel - Sayfa 17

Havalandırma Davlumbazı akpo WK-7 için çevrimiçi göz atın veya pdf Manuel indirin. akpo WK-7 19 sayfaları.

Turning on and off the lighting,

5. CLEANING AND CARE

Regular maintenance and cleaning will ensure high performance and reliability of the hood

while simultaneously prolonging its lifecycle.

Pay particular attention to replacing grease filters and activated carbon filters in accordance

with the manufacturer's recommendations.

The hoods have aluminium filters (Fig. 29) which should be cleaned depending on the

intensity of cooking at least once a month. In order to clean the aluminium filter, it must

be removed from the body and rinsed with warm water with the addition of a grease

dissolving agent or in a dishwasher, after being placed in a vertical position. When

cleaning the aluminium filter, take care not to damage the mesh. After washing and

drying, insert the filter in its place in the hood.

When the aluminium filter works in the drain mode and is not cleaned regularly, it wears

out faster, and the efficiency of the hood diminishes.

Fig. 28

In operating mode, as an absorber, carbon filters absorb odors associated with cooking. The

hood has been designed so that two carbon filters T300 can be mounted on both sides of the

turbine (LIGHT GLASS / LIGHT ECO GLASS / LIGHT ECO / LIGHT / LIGHT PLUS /

LIGHT ECO R/ LIGHT ECO) or one P30 (P3050/60). Carbon filters are not suitable for

regeneration and should be replaced at least once every 3 months or more often in the case

of intensive use of the hood.

Carbon filter replacement T300, P30

1. Disconnect the hood from the electrical outlet.