akpo WK-7 Manuel - Sayfa 19

Havalandırma Davlumbazı akpo WK-7 için çevrimiçi göz atın veya pdf Manuel indirin. akpo WK-7 19 sayfaları.

5. Insert grease filters

6. Connect the hood to the electrical outlet.

To replace the LED bulb (Fig. 32) proceed as follows:

1. Disconnect the hood from the electrical outlet

2. Press the bulb and turn it about 45° counter-clockwise

4. Remove the old bulb

5. Insert a new light bulb (2 W max, see the shield), in the reverse order

6. Connect the hood to the electrical outlet.

5.4 CLEANING

Unplug the power cord before cleaning. For external cleaning, use a damp cloth and a

non-toxic detergent.

Note:

1. If cleaning and maintenance are not carried out in accordance with the

instructions, there is a risk of fire.

2. If you use a gas stove, do not leave open fire.

3. The device is not intended for use by persons (including children) with

physical, sensory or mental disabilities.

4. The device is not intended to entertain children.

5. The air from the hood must not be vented to the chimney used to remove

exhaust gases from gas combustion devices or other fuels.

6. If the permanently built-in power cord is damaged, it must be replaced

by a special cord or block that can be purchased from the manufacturer

or from a specialized repair centre.

7. The manufacturer shall not be liable for any non-compliance with the

rules of installation and operation, as well as improper handling of the

hood.

CAUTION:

External parts may become very hot during use.