Dodge 8W-97 Hizmet Bilgileri - Sayfa 3

Otomobil Parçaları Dodge 8W-97 için çevrimiçi göz atın veya pdf Hizmet Bilgileri indirin. Dodge 8W-97 8 sayfaları. Power distribution

8W-97 POWER DISTRIBUTION - SERVICE INFORMATION

MODULE-INTEGRATED POWER

DESCRIPTION

The Integrated Power Module (IPM) is a combination

of the Power Distribution Center (PDC) (1) and the

Front Control Module (FCM) (2). The IPM is located in

the engine compartment, next to the battery. The

power distribution center mates directly with the (FCM)

to form the IPM. The (PDC) is a printed circuit board

based module that contains fuses and relays, while

the FCM contains the electronics controlling the IPM

and other functions. The IPM connects directly to the

battery positive via a stud located on top of the unit.

The ground connection is via electrical connectors.

The IPM provides the primary means of voltage distri-

bution and protection for the entire vehicle.

All of the current from the battery and the generator output enters the integrated power module via a stud on the top

of the module. Internal connections of all of the power distribution center circuits is accomplished by a combination

of bus bars and a printed circuit board.

1. Disconnect the negative and positive battery

cables.

2. Unsnap cover and remove the B+ terminal nut from

the integrated power module (IPM). Remove the

B+ cable.

3. Remove the IPM from the retaining bracket (1).

4. Disconnect the connectors from the (IPM).

5. Remove the Front Control Module (FCM) (2) retain-

ing screws.

6. Disconnect the front control module by pulling it

straight off the integrated power module.

8W - 97 - 3