Dodge 8W-97 Hizmet Bilgileri - Sayfa 4

Otomobil Parçaları Dodge 8W-97 için çevrimiçi göz atın veya pdf Hizmet Bilgileri indirin. Dodge 8W-97 8 sayfaları. Power distribution

8W - 97 - 4

INSTALLATION

1. Install the Front Control Module (FCM) (2) to the

Integrated Power Module (IPM).

2. Connect the electrical connectors to the IPM (1).

3. Install the IPM to the retaining bracket.

4. Install the B+ cable and nut on the IPM B+ termi-

nal. Snap the cover in place.

5. Connect the negative and positive battery cables.

IOD FUSE

DESCRIPTION

All vehicles are equipped with an Ignition-Off Draw (IOD) fuse that is disconnected within the Integrated Power Mod-

ule when the vehicle is shipped from the factory. Dealer personnel are to reconnect the IOD fuse in the Integrated

Power Module as part of the preparation procedures performed just prior to new vehicle delivery. The following cir-

cuits are protected by the IOD fuse:

• Cluster (CCN)

• Diagnostic Connector

• Map Lamps

• Glove Box Lamp

• Courtesy Lamps

• Radio

• Underhood Lamp

The term ignition-off draw identifies a normal condition where power is being drained from the battery with the igni-

tion switch in the Off position. The IOD fuse feeds the memory and sleep mode functions for some of the electronic

modules in the vehicle as well as various other accessories that require battery current when the ignition switch is

in the Off position. The only reason the IOD fuse is disconnected is to reduce the normal IOD of the vehicle elec-

trical system during new vehicle transportation and pre-delivery storage to reduce battery depletion, while still allow-

ing vehicle operation so that the vehicle can be loaded, unloaded and moved as needed.

The IOD fuse is disconnected from Integrated Power Module when the vehicle is shipped from the assembly plant.

Dealer personnel must reconnect the IOD fuse when the vehicle is being prepared for delivery in order to restore full

electrical system operation. Once the vehicle is prepared for delivery, the IOD function of this fuse becomes trans-

parent and the fuse that has been assigned the IOD designation becomes another Fused B(+) circuit fuse.

The IOD fuse can be used by the vehicle owner as a convenient means of reducing battery depletion when a vehi-

cle is to be stored for periods not to exceed about thirty days. However, it must be remembered that disconnecting

the IOD fuse will not eliminate IOD, but only reduce this normal condition. If a vehicle will be stored for more than

about thirty days, the battery negative cable should be disconnected to eliminate normal IOD; and, the battery

8W-97 POWER DISTRIBUTION - SERVICE INFORMATION