DOEPFER d3m Kullanıcı Kılavuzu - Sayfa 8

Elektronik Klavye DOEPFER d3m için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DOEPFER d3m 12 sayfaları. Organ keyboard

Operation

The d3m is switched on by plugging the AC adapter into a wall outlet and connecting it to the

appropriate jack of the d3m. There is no separate on/off switch.

For operation d3m has 22 buttons available. Each button is equipped with a corresponding

LED (light emitting diode). The buttons are organized in two groups:

•

Preset Number:

•

Preset Bank:

The 12 number buttons correspond to the reverse colored lowest octave that was available

in some previous organs.

There are two main modes available: the play mode and the programming mode.

The play mode is the normal operation mode that is used to play on the keyboard, send

program change messages with the buttons and operate the foot controller and foot switch to

transmit the corresponding Midi messages. The play mode is called up when d3m is turned

on without operating one of the 22 buttons during power on. Corresponding to the previous

adjustments in the programming mode (see below) one of the three play modes is available

after power on:

•

B4 play mode

•

EVB3 play mode

•

Remote play mode

The programming mode is used to adjust several parameters of the d3m (e.g. Midi channel,

play mode, functions of foot controller and foot switch). The programming mode is called up

when d3m is turned on while one of the 22 buttons is held down during power on.

The different modes are now described in detail.

d3m

12 buttons 1...12

10 buttons 1...10

Page 8

User's Guide V1.2