DOEPFER d3m 사용자 설명서 - 페이지 8
{카테고리_이름} DOEPFER d3m에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DOEPFER d3m 12 페이지. Organ keyboard
페이지 인쇄Operation
The d3m is switched on by plugging the AC adapter into a wall outlet and connecting it to the
appropriate jack of the d3m. There is no separate on/off switch.
For operation d3m has 22 buttons available. Each button is equipped with a corresponding
LED (light emitting diode). The buttons are organized in two groups:
•
Preset Number:
•
Preset Bank:
The 12 number buttons correspond to the reverse colored lowest octave that was available
in some previous organs.
There are two main modes available: the play mode and the programming mode.
The play mode is the normal operation mode that is used to play on the keyboard, send
program change messages with the buttons and operate the foot controller and foot switch to
transmit the corresponding Midi messages. The play mode is called up when d3m is turned
on without operating one of the 22 buttons during power on. Corresponding to the previous
adjustments in the programming mode (see below) one of the three play modes is available
after power on:
•
B4 play mode
•
EVB3 play mode
•
Remote play mode
The programming mode is used to adjust several parameters of the d3m (e.g. Midi channel,
play mode, functions of foot controller and foot switch). The programming mode is called up
when d3m is turned on while one of the 22 buttons is held down during power on.
The different modes are now described in detail.
d3m
12 buttons 1...12
10 buttons 1...10
Page 8
User's Guide V1.2