DOEPFER A-154 Manuel - Sayfa 13
Kontrolör DOEPFER A-154 için çevrimiçi göz atın veya pdf Manuel indirin. DOEPFER A-154 16 sayfaları. Sequencer controller, system a-100
Sayfayı Yazdırdoepfer
Appendix: Connection A-154 – A-155
(1) Disconnect the 10 pin ribbon cable leading from the connector ST1 of the small A-155 controller board to the
bus board. This cable is no longer required. But you may keep it as a bus cable replacement (for other modules with
10 pin connectors).
(2) Disconnect the 10 pin ribbon cable leading from the connector ST2 of the small A-155 controller board to the
other boards of the A-155 (potentiometer and trigger boards). This cable is connected to another ribbon cable co-
ming from the A-154 (see below).
System A - 100
(1) disconnect this cable
(no longer required)
(2) disconnect this cable, will be
connected to a cable coming from A-154
Sequencer Controller
A-154
13