DOEPFER A-154 Manuel - Sayfa 15
Kontrolör DOEPFER A-154 için çevrimiçi göz atın veya pdf Manuel indirin. DOEPFER A-154 16 sayfaları. Sequencer controller, system a-100
Sayfayı Yazdırdoepfer
(4) Connect B1 with the female connector at the end of the ribbon cable that was removed from ST2 of the small A-
155 controller board (this cable leads to the potentiometer and trigger boards of the A-155). The male pin header in-
serted into female connector B1 is used to establish this connection. Pay attention the the position of the red wire is
the same for both ribbon cables ! The complete connection looks like this:
to potentiometer
and trigger
boards of A-155
System A - 100
B1
Sequencer Controller
to A-154
B2
A-154
15