Cannondale Alloy Road Disc Hızlı Başlangıç Kılavuzu - Sayfa 5

Bisiklet Cannondale Alloy Road Disc için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Cannondale Alloy Road Disc 16 sayfaları.

Step 1. Install your handlebars.

Using the included Allen wrench, loosen and remove the bolts and

faceplate from the stem. The stem connects the handlebar to the

fork. Set the bolts and faceplate aside together, so you don't lose

anything.

Insert the handlebar into the stem and verify the brake hoses and

shift cables wrap around the frame cleanly, without kinks to any of

the lines.

Loosely reattach the faceplate to the stem. Take care to not tighten

one bolt more than another. Your goal is a consistent gap between

the stem and faceplate.

Center the handlebar in the stem using the markings on the bar, then

roll it back into a comfortable position. Lightly hand-tighten the stem

bolts using the Allen key, ensuring there's an even gap between the

stem and faceplate. We'll fully tighten these later.

SET-UP

STEP 1

STEP 2

STEP 3

STEP 4

PRE-RIDE CHECK