Dogtrace d-control easy Kullanıcı Kılavuzu - Sayfa 10
Evcil Hayvan Bakım Ürünü Dogtrace d-control easy için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dogtrace d-control easy 19 sayfaları. Electronic training collar
Sayfayı YazdırREPROGRAMMING OF YOUR RECEIVER
The receiver can be programmed repeatedly without restraint either using the same remote controller
or with another (see the section Programming (matching) of your remote controller and receiver).
TIP: It is possible to program an unlimited number of receivers to one receiver, which is possible
to use for common training of several dogs. It is possible to record two transmitters into one
receiver, which the instructor can use, for instance, for a potential correction of the dog training.
How to use the remote controller
The Dogtrace d–control easy remote controller is designed for interaction with one receiver.
Button
– sound signal
When you press down the sound signal button, you will be able to send the sound signal to your
receiver within a great distance. There is no time limit for this function: The buzzer will sound for as
long as you are holding the pressed down button and the green LED on your receiver will be
permanently lit.
Buttons
to
By pressing down this button, you will send your dog an alert in the form of stimulation impulse
transmitted by the two contact points located in the receiver collar, being generated all the time you
are holding the pressed down button, however, restricted for 8 seconds at the most.
The transmission will be indicated by the red LED on your receiver that will be lit as long as you are
pressing down the buttons for stimulation impulse.
Level 1: very weak impulse, Level 2: weak impulse, Level 3: medium strong impulse, Level 4: strong
impulse
Level 5: very strong impulse, Level 6: the strongest impulse
10