Dogtrace d-control easy Kullanıcı Kılavuzu - Sayfa 8

Evcil Hayvan Bakım Ürünü Dogtrace d-control easy için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dogtrace d-control easy 19 sayfaları. Electronic training collar

Sayfayı Yazdır

Turning ON/OFF

TURNING THE REMOTE CONTROLLER ON/OFF

Turning on: Press down for 1 second the black



Turning on is indicated by a sound signal and by a flashing green LED.

Turning off: Again, press down for 1 second the black



indicated by a sound signal and the green LED stops flashing.

CAUTION: To save the service life of the battery, the transmitter will be automatically turned off

after 120 minutes of inactivity.

TURNING THE RECEIVER (COLLAR) ON/OFF

The magnetic switching system located in the remote controller is used to turn the receiver (collar) on

and off.

Turning on: Touch the lower part of the remote controller



for 1 second to the target on the receiver (refer to the Fig.).

The receiver indicator will start flashing green and this

indicates that the receiver is ready for use.

Turning off: Again, touch the lower part of the remote



controller for 1 second to the target on the receiver (see

the Fig.). The LED indicator of the receiver will shine red.

The receiver is turned off.

To enhance the service life of the battery, it is necessary to

turn off the receiver always after training is finished. If the

receiver is not used for a longer period of time, we

recommend you to remove the battery from it.

On/Off button on the remote controller.

On/Off button. Switching off is

The situation when the receiver is

turned on/off and the transmitter is

being matched with the receiver