Dogtrace d-control easy 사용자 설명서 - 페이지 8
{카테고리_이름} Dogtrace d-control easy에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dogtrace d-control easy 19 페이지. Electronic training collar
페이지 인쇄Turning ON/OFF
TURNING THE REMOTE CONTROLLER ON/OFF
Turning on: Press down for 1 second the black
Turning on is indicated by a sound signal and by a flashing green LED.
Turning off: Again, press down for 1 second the black
indicated by a sound signal and the green LED stops flashing.
CAUTION: To save the service life of the battery, the transmitter will be automatically turned off
after 120 minutes of inactivity.
TURNING THE RECEIVER (COLLAR) ON/OFF
The magnetic switching system located in the remote controller is used to turn the receiver (collar) on
and off.
Turning on: Touch the lower part of the remote controller
for 1 second to the target on the receiver (refer to the Fig.).
The receiver indicator will start flashing green and this
indicates that the receiver is ready for use.
Turning off: Again, touch the lower part of the remote
controller for 1 second to the target on the receiver (see
the Fig.). The LED indicator of the receiver will shine red.
The receiver is turned off.
To enhance the service life of the battery, it is necessary to
turn off the receiver always after training is finished. If the
receiver is not used for a longer period of time, we
recommend you to remove the battery from it.
8
On/Off button on the remote controller.
On/Off button. Switching off is
The situation when the receiver is
turned on/off and the transmitter is
being matched with the receiver