1010music Bitbox Micro 2.2 Hızlı Başlangıç Kılavuzu - Sayfa 2

Kayıt Ekipmanları 1010music Bitbox Micro 2.2 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. 1010music Bitbox Micro 2.2 4 sayfaları.

Sayfayı Yazdır
CONFIGURE A PAD
Push the Right Arrow button from the Pads screen to drill into the Waveform and
Parameters screens.
WAV FILE NAME
Touch to load a different
PAD MODE
WAV file.
Touch to change.
PAD
GRID
Touch to
choose a
different
pad.
Waveform
PLAYBACK RANGE
(Pink) & LOOP
POINTS (White)
Turn the top knob to
select an end point to
control. Turn the bottom
knob to set the end
point's position.
SELECT A PAD MODE
Touch the Pad Mode button on the Waveform screen to select one of the following pad
modes:
Icon
Pad Mode
Sample
Multi-Sample Spread a list of wav files across the keyboard
Clip
Slicer
Granular
New Rec
New Multi
Page 2
PLAY
Touch to
trigger the pad.
WAVEFORM
Pinch to zoom.
Drag to scroll.
END POINT: VALUE
The name of the
selected end point
and it's current value.
Description
Use to play single notes, free playing audio
samples or drum hits.
to get more realistic instrument pitch
shifting or to map different sounds to each
key on the keyboard.
Use for synchronized loops and quantized
playback, e.g. drum loops and guitar tracks
between one and eight measures long.
Use with a WAV file with different sections
that you want to trigger independently.
Generate new sounds from your samples.
The sample is played back in small portions
about 10 to 200ms in length, called grains.
Use to start recording a new WAV file or
clear a WAV from a pad.
Use to start recording a new set of WAVs for
use in multi-sampling.
PARAMETERS
PAGE
Touch to change.
PARAMETERS
Top knob
selects a
parameter,
bottom knob
changes the
Parameters
value.
Reverse
Playback
Copyright 2023 by 1010music LLC
MODULATION
SLOTS
Push the right
arrow button to
configure.
Beat
Set Loop
Play
Sync
Points
Slices