ASG X-PAQ ASG-NW2500-EIP Kullanıcı Kılavuzu - Sayfa 13
Kontrol Ünitesi ASG X-PAQ ASG-NW2500-EIP için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. ASG X-PAQ ASG-NW2500-EIP 15 sayfaları. Ethernet ip network communication module
Sayfayı Yazdır
Programming Data Output:
Similarly, each piece of output data can be located wherever the user desires in the output
message. To program any of the output data, select it from the data output sub-menu.
When the ENT key is pressed, the address of where the first byte will be placed will be
shown. The user can use the arrow keys to manipulate this value and set it to any desired
address or to DONOT SEND. Once the desired value is displayed, pressing ENT will store
that value. The ESC key can be pressed to exit without saving
Data Input
Input Data
# of Bytes
Parameter
Batch Reset
Suspend
Batch Value
Time
Date
Torque Min
Torque Max
Angle Min
Angle Max
Units
The user has the ability to decide the total number of bytes this unit
with transmit as output bytes. The user can also decide which ele-
ments of output data will be transmitted and at what address.
To set the number of output bytes, the user will want to select Num
Output Bytes from the Data Output submenu. After pressing the ENT
key, the user can use the arrow keys to set the number of output
bytes. Pressing ENT will save this value ESC will allow the user to exit
without saving a new value.
This unit is capable of receiving 40 input bytes. The user can select
which groups of information are actually received.
Default Location
1
1
1
1
6
6
6
6
5
5
1
0
1
2
3
4
10
16
22
28
33
38
13