Ashcroft DG25 Kurulum ve Kullanım Talimatları Kılavuzu - Sayfa 10
Ölçüm Cihazları Ashcroft DG25 için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Talimatları Kılavuzu indirin. Ashcroft DG25 16 sayfaları. Digital pressure gauge
Sayfayı Yazdır
Light:
Determines how long the back light will remain
ON after any key is pressed in Measurement or
Menu Modes (Note: The timer is reset with any
key being pressed.)
1. While in Menu mode, press
until "LIGHT" is displayed.
©
k
2. Press
for timer value to appear;
"ON" refers to the back light remaining
ON at all times unit is powered ON,
"PRESS" designates that the back light
is switched on / off by briefly pressing
©
the backlight
M ENU
dicates the back light will never be illu-
minated. Selecting time values, "1 MIN"
(default), "5 MIN", "20 MIN", will acti-
vate the backlight symbol on the LCD
display for the designated minutes.
©
k
3. Press
to select back light time
(display will briefly show "DONE") and
return to Measurement Mode.
Note: In "PRESS" mode; factory has set 1
hour timer to save battery.
Feature: Back light indicator will blink 10 sec-
onds prior to light shut off.
©
©
,
whereas, "OFF" in-
10
Update:
Utilized to select the rate at which the displayed
pressure value is updated on the screen. This
function is used when rapid changes in pres-
sure cause "flutter" in the display values;
longer intervals will reduce the update rate and
"average" the readings on such applications.
1. In Menu mode, press
"UPDAT" appears.
©
k
2. Press
to select.
©
©
3. Press
,
"1 SEC" (default), "500 MSEC", or "250
MSEC".
©
k
4. Press
to select value (display will
briefly show "DONE") and return to
Measurement Mode.
Note: Changing value to anything other than
1 sec may cause a slight zero offset, and it
is recommended that the gauge be fully
vented and re-zeroed before taking accurate
readings. Also, battery life will be reduced
by use of an update rate faster than 1 SEC.
©
©
,
until
to select values for