Ashcroft DG25 Kurulum ve Kullanım Talimatları Kılavuzu - Sayfa 13
Ölçüm Cihazları Ashcroft DG25 için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Talimatları Kılavuzu indirin. Ashcroft DG25 16 sayfaları. Digital pressure gauge
Sayfayı Yazdır
6. To program minimum graph percentage,
the display will indicate 0 0 with the right
digit flashing, the bottom most segment
of the bar graph will flash, and the dis-
play will read "PCTFS" (percent full
©
scale). Press
num-ber 0-9. Press
num-ber. The left digit will now begin to
©
flash. Press
,
©
k
number 0-9.
number. The 2 digit number entered
represents the percentage of full scale
to be used as the low end of the graph
(0-99%).
7. To program maximum percentage of full
scale the display will indicate 1 0 0 with
the right digit flashing, the upper most
segment of the graph will flash, and the
display will read PCTFS (percent full
©
scale). Press
,
a number 0-9. Press
that number. The left 2 digits will now
begin to flash. Press
scroll to a number 0-10. Press
select that number. The number entered
represents the percentage of full scale
to be used as the high end of the graph.
Note: 100 is the highest and only possi-
ble 3 digit number. If the low number is
equal to or larger than the high number,
the unit will flash "REJCT"
and it will exit back into the "GRAPH"
sub-menu.
Note: Custom graph function is not available
on vacuum and compound ranges.
Note: A display message "ULOCK" indicates
that custom units are being used and bar
graph minimum and maximum are set to
the factory defaults
©
,
to scroll to a
©
k
to select that
©
. to scroll to a
. to select that
©
. to scroll to
©
k
to select
©
©
,
to
©
k
to
Reset:
Returns the product to the factory default val-
ues.Preserves field calibration. Factory calibra-
tion can be restored in the "RECAL" menu.
1. In menu mode
"RESET" appears on display's lower line;
©
k
.
Factory defaults pertain to units, timer,
back light, update rate, zero lock.
Display will indicate "DONE" then gauge
will switch to "OFF" condition.
13
©
©
,
until