Cypress HTCP-255DN Kullanım Kılavuzu - Sayfa 5

Medya Dönüştürücü Cypress HTCP-255DN için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Cypress HTCP-255DN 16 sayfaları. Pc/hd to 1080p dvi scaler box

Sayfayı Yazdır
Cypress HTCP-255DN Kullanım Kılavuzu

4. OPERATION CONTROLS AND FUNCTIONS

4.1 Front Panel

INPUT
Cr/Pr
Cb/Pb
1
1
Component Input: Connects this input connector to the
Component output connector of your source equipment using the
enclosed 3RCA to 3RCA cable.
The device accepts both interlaced component input
(480i, 576i) and deinterlaced progressive input (480p, 576p...1080p).
The input range is from 480i, 570i~1080i to 1080p.
2
IR Sensor: Infrared remote control sensor.
3
Input LED Indicators: When one of the LED illuminates its
corresponding source is being selected as input.
4
Menu/Enter: This button serves two purposes.
a. Press the button to bring up OSD main menu as shown in the
"OSD Operation". (page 9)
b. To act as a "Enter" key to enter sub menu or to adjust setting
value of the selected parameter.
+/- button: The buttons provide 3 functions:
5
a. Input select ("+"): Press the "+" button repeatedly to select your
desired input source. The input sources are toggled through in the
following sequence.
b. Auto Tune ("-"): Press the "-" button to carry out picture auto
adjust for analog inputs (component or PC). The device will fi ne
tune the position (centering) and color of the output picture.
c. When in the OSD menu mode: Press the"+", "-" button to move
up or down the highlight bar to your desired parameter. Or once a
parameter is selected with MENU/Enter button, press the button to
Y/HD
2
YPbPr (YCbCr)
MENU
HD
PC
DVI
ENTER
3
4
PC
DVI
AUTO
INPUT
POWER
ADJUST
+
-
5
6
2 2