Cypress HTCP-255DN Kullanım Kılavuzu - Sayfa 6

Medya Dönüştürücü Cypress HTCP-255DN için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Cypress HTCP-255DN 16 sayfaları. Pc/hd to 1080p dvi scaler box

Sayfayı Yazdır

adjust setting value of your selected parameter.

Power: Press the button to turn ON or turn OFF (standby) the power

of the unit.

4.2 Rear Panel

DC 5V

DVI OUT

Power jack: Connect to the 5V 2.6A DC power adaptor.

DVI output: Scaled digital DVI output. Connect this output to the

DVI input or HDMI input of your Digital display.

Note: When input is a HDCP encrypted DVI signal the DVI output is

also HDCP encrypted.

The monitor/display that connected to this output also need to be

HDCP compliant in order to get a nice and clean picture. A non-

HDCP compliant display can only display non-HDCP signal and

picture will become noise when input is a HDCP-encrypted signal.

PC/D-Sub out: The connector for scaled analog RGB output.

Connect this output port to the analog PC RGB input of your

monitor, or connect it to the RGBHV input of your HD display using

D-sub to 5 BNC adaptor cable. (not included in the package)

Note: When input is a HDCP encrypted DVI signal this analog

output will be turned off.

DVI input: Connects this DVI input connector to the DVI output

connector of your DVI source equipment. The DVI input should be

digital DVI only and should not include analog RGB signal.

The use of DVI-I connector is to ensure both DVI-I and DVI-D male

connector of the DVI cable can ﬁ t into this input connector.

The digital DVI input resolution can range from 480i~1080p, or

VGA~WUXGA.

PC input: Connects this PC input connector to the VGA output of

your PC. The acceptable PC resolutions range from VGA~WUXGA.

3 3

PC OUT

DVI IN

PC IN