Ashly FR-16 Kullanım Kılavuzu - Sayfa 2

Uzaktan Kumanda Ashly FR-16 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Ashly FR-16 17 sayfaları. Fr remotes network remote controls
Ayrıca Ashly FR-16 için: Kullanım Kılavuzu (12 sayfalar), Ürün Özellikleri (2 sayfalar)

Sayfayı Yazdır

Operating Manual - FR-8 and FR-16 Remote Level Controller

FR Features

Front Panel

1) Push Button LED Label Window - Insert

switch label made from Ashly template doc

2) Push Button LED - Used to switch fader

Mute or fader A/B Source Select. LED also

indicates signal level or fader status

3) Channel Fader - Adjusts level of targeted

DSP gain stage or output mixer source

Rear Panel

1) RJ-45 Jack - Connects to Ethernet

Network with PoE or PoE injector

2) Link LED - Shows network is connected

3) Data LED - Shows Data is transferring

On Startup:

1. When the FR-8 or FR-16 is first connected or powered on, it attempts to communicate with

all devices it has been programmed to control, if any.

2. Once communication with the targeted device is established, it waits to transmit any fader or

switch position data until a control is physically changed by the user. At that point only the data for

that control is sent.

***This feature prevents sudden and unexpected changes when reconnecting or re-starting the

FR remote control, as well as when a new preset is recalled to the host device.

PLEASE NOTE: When in doubt, make sure all faders are either in the correct position or fully

down before reconnecting

(FR-8 not shown)

4) Channel Fader Label Window - Insert

switch label made from template doc

5) Power LED - Shows device is powered

6) Master Fader - Adjusts level of all

assigned channel faders

4) Lockout Connector - Used with contact

closure to disable all front panel controls

5) Serial Number and MAC Address - Used

for warranty or flash programming