ASI 0388 Manuel - Sayfa 3
Dağıtıcı ASI 0388 için çevrimiçi göz atın veya pdf Manuel indirin. ASI 0388 3 sayfaları. Vanity mounted automatic soap dispensing system liquid soap dispenser
Sayfayı YazdırBATTERY PACK FOR VANITY MOUNTED AUTOMATIC SOAP DISPENSING SYSTEMS
1/4" [7]
C L
6-7/8"
6-5/16"
[175]
[161]
C L
1-3/4" [44]
C L
3-1/2" [288]
FRONT VIEW
SPECIFICATION
Battery Pack for Vanity Mounted Automatic Soap Dispensing Systems shall hold four (4) D-size battery cells, in
self-contained gray ABS molded plastic case. Cover is matching gray ABS molded plastic retained with M4x0.7x16
Phillips Pan head screws (provided) tightened through counterbore holes (provided) into bosses with threaded inserts.
Power socket is provided for Vanity Mounted Automatic Soap Dispensing Systems. Mounting brackets shall be
integral with molded case and shall accommodate № 8 - № 10 or M4 screws (by others). Corners shall be rounded
and all edges smooth.
Battery Pack for Vanity Mounted Automatic Soap Dispensing Systems shall be Model № 0385-BP of American
Specialties, Inc., 441 Saw Mill River Road, Yonkers, NY 10701-4913
INSTALLATION
Install battery box on wall using two (2) № 8 - № 10 or M4 self-threading Phillips pan head screws (by others)
through hole and mounting slot provided in top and bottom brackets. Alternatively install a pan head screw with
head size that fits through the slot-tab hole at chosen location and hang battery box on one (1) screw for
convenience in protected vanity condition. Locate battery box in position within easy reach of dispenser power
cable that affords convenience for unplugging cable and unscrewing cover to replace batteries during unit lifetime.
OPERATION
Installer positions Battery Pack manually to retain in most convenient orientation to connect to power cable from
countertop dispenser shank or Top-Fill Tank controller socket. Installed screws through brackets securely hold
battery box from shifting. Even DC power is supplied for operating lifetime of cells installed and battery cells are
replaced on cycle determined by maintenance needs. Do not mix old cells with new cells when replacing for service;
only use new cells when replacing old cells.
13/64" DIA. [Ø5]
1/4" [6]
C L
CABLE LENGTH 20" [508]
POWER PLUG
ALL DIM'S INCH [MM]
ILLUSTRATION FOR REF ONLY AND NTS
HOLDS FOUR (4) "D" SIZE 1.5V ALKALINE BATTERIES
THIS MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES IN DESIGN OR DIMENSIONS WITHOUT FORMAL NOTICE
NOTE
MODEL №:
ISSUED:
REVISED:
1/8" [3]
1-1/2" [39]
SIDE VIEW
0385-BP
9 SEP 2020
ISOMETRIC