Cytech KP04 Hızlı Başlangıç Kılavuzu - Sayfa 3
Tuş takımı Cytech KP04 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Cytech KP04 4 sayfaları. Lcd keypad
Ayrıca Cytech KP04 için: Kurulum Kılavuzu (20 sayfalar)
Sayfayı YazdırJP8 – IR receiver. Shunted (default) to enable IR
receiving. Open to disable the IR receiver.
SW1 – set according to the ID of the keypad
ID Settings (SW1)
Comfort is able to support up to 8 keypads
(KP03/KP04/KP05/KT03) in any combination. SW1 is a
set of 4 headers which is used to determine the ID
according to the table below:
ID
1
2
3
4
5
6
7
8
In Comfigurator, the number of keypads must be set to
the same as the maximum number of keypads
LED Indications
Off (Green)
Steady
Security Off, all conditions Normal (no trouble)
Blinking
Trouble e.g. Phone line cut, RS485 comms
failure. Trouble Condition is displayed
Arm (Red)
Steady
System armed, No alarm) security mode
(Away, Night, Day, Vacation) is displayed
Blinking
Alarm / Alert condition.
AC (Red)
Steady
Mains Power failure.
Blinking
Standby battery voltage is low due to prolonged
power failure.Battery may need to be replaced.
Msg (Green)
Steady
New Internal message. Press # to hear who the
message is for. Sign in with user code to hear
the message
Blinking
New message from phone. Press # to hear who
SW1-A
Short
Open
Short
Open
Short
Open
Short
Open
SW1-B
Short
Short
Open
Open
Short
Short
Open
Open
SW1-C
Short
Short
Short
Short
Open
Open
Open
Open
SW1-D
Short
Short
Short
Short
Short
Short
Short
Short