EGB 683 625 Kullanıcı Kılavuzu - Sayfa 7
Uzaktan Kumanda EGB 683 625 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. EGB 683 625 16 sayfaları.
Sayfayı Yazdır
Remote Control button Operation
BUTTON
Change sensor settings
1.
Press the
button, the remote control will display the last settings of the remote control via
the indication LEDs.
2.
Press the navigation keys
shows which setting view you're in on the remote control. Press the navigation key
change parameters of the appropriate setting type (flashing LED).
3.
Press
to save the current settings view to the remote control.
4.
Point the remote control at the sensor you want to set up and press the
The product with the sensor will flash 1x to confirm that it has received the settings. This step
can be repeated with multiple luminaires with the same sensor so that all luminaires contain
the same settings.
DESCRIPTION
Press the <on/off> key
to turn the lamp on or off
permanently. The highbay
re-sponds by blinking once.
(Press <auto> key to get out
of this mode)
- Displays the latest set-
tings using the remote
control LEDs indication.
- Resets the settings to the
dip-switch settings of the
sensor
Activate/navigate the remote
control in set-tings
Confirm setting/parameter
Activate display of saved
settings in remote control
to navigate within current settings. A flashing led indicator
BUTTON
7
eltric K. Heckel GmbH
Weiherstraße 29
D-95448 Bayreuth
www.eltric.com
DESCRIPTION
The remote starts in setup
mode with the last program-
med settings
Put the sensor in test mode,
the product responds 2 se-
conds to motion detection
Change parameters on the
remote control
Send current remote control
setting view to sensor
Activate the daylight function
on the remote control
button to send it.
D
EN
NL
to