ambiance HC-669 Kurulum ve Güvenlik Talimatları

Transformatör ambiance HC-669 için çevrimiçi göz atın veya pdf Kurulum ve Güvenlik Talimatları indirin. ambiance HC-669 2 sayfaları.

Sayfayı Yazdır

INSTALLATION AND SAFETY INSTRUCTIONS HC-669

INSTRUCTIONS FOR INSTALLATION OF THE

AMBIANCE

TRANSFORMER

WARNING: Be sure the electricity to the wires you are

working on is shut off; either the fuse removed or the circuit

breaker off.

This plug in electronic transformer has (2) Class

(each 60w max), for this transformer to operate the wattage

load must be a minimum of 15w, but must not exceed 60w on

each output.

FOR PROPER OPERATION OF AN ELECTRONIC

TRANSFORMER, THE WATTAGE LOAD MUST FALL

WITHIN THE SPECIFIED RANGE. IF THE LOAD DOES NOT

FALL WITHIN THIS RANGE, THE TRANSFORMER MAY

MALFUNCTION OR LAMPS MIGHT FLICKER.

TRANSFORMER INSTALLATION

Select the desired location to mount the transformer (not in

contact with insulation & away from oven or any other source

of intense heat). Using the two screws (provided), fasten the

transformer and mounting tab to the mounting

surface.

SCREW

PART A

120V SWITCH

TRANSFORMER

DISC LIGHT

PLUG

outputs

120V

CORD

NUT

FIGURE 3

120V

TRANSFORMER

PLUG OUTLET

INPUT

DISC

LIGHT

FIGURE 4

(IF APPLICABLE - CONNECT

SECOND PLUG TO LIGHTS)

120 WATTS

(2 x 60 WATT)

TRANSFORMER

THE INPUT/OUTPUT VOLTAGE IS

MARKED ON THE TRANSFORMER

NON-TRACER WIRE

120V

CORD

TRACER WIRE

120V

QUICK-CONNECT PLUG

HC-669

073002

www.SeaGullLighting.com

U.S. PAT. # 5,465,199

TO PLUG (TO LIGHTS)

12V

120V

FROM 120V PLUG

FIGURE 1

COVER

FIGURE 2