Ambient Weather WS-8460 Kullanıcı Kılavuzu - Sayfa 4
Çalar Saat Ambient Weather WS-8460 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Ambient Weather WS-8460 17 sayfaları. Clear view projection alarm clock with indoor temperature and color changing outdoor temperature
Sayfayı Yazdır
No
Description
1 Alarm/Snooze Button
- Stop the current alarm when sounding and
enter into snooze mode.
- Press and hold for two seconds to stop the
current alarm when sounding for 24 hours.
2 Reverse Button
Press to reverse the projection 180 degrees.
3 Projector
- Projects the time and indoor/outdoor
temperature (automatically scrolls between
indoor and outdoor temperature every 5
seconds).
4 LCD Display
5 Time Button
- Press to switch between Month/Date and
alarm time mode (Alarm 1 and 2).
- Press and hold for 2 seconds to enter time
set mode.
- In time set mode, press to step through the
different time and date settings.
6 ALARM Button
- In normal time display mode, Press TIME
button to display ALM1 & ALM2.
Press ALARM to turn on/off ALM1 &
ALM2.
- Press to stop the current alarm when the
alarm is ringing and turn off the alarm and
snooze function.
- In alarm time mode, press and hold for 2
seconds to enter alarm time setting mode.
- In alarm time setting mode, press to step
through the different time and date settings.
7 MAX / MIN Button
- Press to display the maximum and
Version 1.0
©Copyright 2016, Ambient LLC. All Rights Reserved.
No
Description
12 FOCUS Knob
- Adjust the focus of the projected time
and temperature.
13 RESET Button
- Press to reset all values to default
values.
- In case of malfunction, the unit can be
reset.
14 CHANNEL/UP Button
- In set mode, press to increase the
values (press and hold to change
rapidly).
- In normal time display mode, press to
switch between Remote Sensor
Channels 1, 2 and 3.
- In normal time display mode, press
and hold for 2 seconds to automatically
scroll between sensor channels 1, 2 and
3.
15 12/24 / DOWN Button
- In set mode, press to decrease the
values.(press and hold to change
rapidly)
- In normal time mode, press to switch
between 12 and 24 hour format.
16 HISTORY Button
- In normal mode, press to view hourly
historical data stored in memory (last 72
hours).
17 BARO Button
- Press to switch pressure units of
measure between hPa, inHg and mmHg.
- Press and hold for 2 seconds to switch
between relative pressure and absolute
pressure.
- In relative pressure mode (REL is
flashing), press BARO to enter the
relative pressure calibration mode. Press
BARO again to save and exit the
settings, or
the clock will automatically exit in 60
seconds without pressing any key.
- In absolute pressure mode, press
BARO to save and exit the setting.
18 °F/°C Switch
- Select switch between °F and °C units
Page 4