Ambient Weather WS-8460 Kullanıcı Kılavuzu - Sayfa 5
Çalar Saat Ambient Weather WS-8460 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Ambient Weather WS-8460 17 sayfaları. Clear view projection alarm clock with indoor temperature and color changing outdoor temperature
Sayfayı Yazdır
No
Description
minimum temperature and pressure records.
8 OUTDOOR TEMPERATURE Button
- Press it to enter TEMP mode, and the
backlight will change color according to the
outdoor temperature transmitted from the
remote sensor. There are 13 backlight colors
for the different temperature ranges.
9 MANUAL Button
- Press MANUAL button and the backlight
color will change automatically (256 colors);
Press it again, and the backlight color will
stop at the color you prefer.
10 RAINBOW Button
Press RAINBOW button, and the backlight
will change color as follows:
white>red>orange>yellow>green>cyan>blue>purple
11 TUNE Button
Press and hold the TUNE button to fine tune
the color. The backlight will automatically
display 256 colors. Let go of the TUNE
button to stop at the color you prefer.
3.1.2 Wireless Transmitter
No
Description
1
Transmitter LED (flashes when the remote
is transmitting)
2
Reset button (press reset to restart the
transmitter)
3
Transmitter channel (assign the transmitter
to 1,2 or 3, default = 1)
4
2 x AA batteries
Note: The WS-8460 supports three wireless channels. If you have one sensor, leave the transmitter
Version 1.0
©Copyright 2016, Ambient LLC. All Rights Reserved.
No
of measure.
19 SCAN Button
Press to resynchronize with the sensors.
20 OFF / LO / HI Slide Switch
- Slide to the OFF position to turn off
the backlight.
- Slide to the HI position to brighten the
backlight.
- Slide to the LO position to dim
backlight.
21 AC Jack
- AC 6V 300mA.
22 Battery door
- Accommodates lithium battery
CR2032 for back-up.
Figure 2
No
5
Wall hanger
6
Battery cover
7
Table stand
Description
Description
Page 5