Ambient Weather WS-8460 Kullanıcı Kılavuzu - Sayfa 9
Çalar Saat Ambient Weather WS-8460 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Ambient Weather WS-8460 17 sayfaları. Clear view projection alarm clock with indoor temperature and color changing outdoor temperature
Sayfayı Yazdır
5.3 Projector and Backlight
Note: The projector only operates while plugged into AC power.
5.3.1 Projector Rotation
Press the REVERSE button
degrees.
5.3.2 Adjusting Projector Focus
Adjust the focus of the projected data by rotating the focus knob on the projector.
5.4 Barometric Pressure Display and Settings
5.4.1 Barometric Pressure Units of Measure
In normal time mode, press the BARO button to change barometric units of measure (hPa / inHg /
mmHg).
5.4.2 Absolute Pressure vs. Relative Pressure
Press and hold the BARO button for 2 seconds to enter barometric mode, and press the UP button to
switch between the relative and absolute pressure reading.
5.4.3 Relative Pressure Calibration
Please Reference Section 5.4.3.1 for details on the purpose of calibrating relative pressure, and how
to calibrate relative pressure in your area.
1. Press and hold the BARO button for 2 seconds to enter barometric mode. The icon rel or abs
(relative or absolute) will flash.
Make sure the REL Pressure is showing on the display. If ABS Pressure is showing, switch to
REL pressure per Section 5.4.2.
2. Press (do not hold) the BARO button again. The relative pressure will flash.
Version 1.0
©Copyright 2016, Ambient LLC. All Rights Reserved.
on the top of the clock to reverse the projected data 180
Figure 6
Page 9