AMC XCD Інструкція з монтажу та експлуатації - Сторінка 6
Переглянути онлайн або завантажити pdf Інструкція з монтажу та експлуатації для Програвач компакт-дисків AMC XCD. AMC XCD 14 сторінок.
Друкувати сторінкуREAR PANEL CONNECTIONS
1. AUDIO OUTPUT
Connect
the left and right channel
unbalanced
(RCA) audio outputs to
any input on your pre-amplifier
or
receiver except"
Phono"
or "Turn-
table ". High-quality
interconnection
cables are recommended.
2. DIGITAL OUTPUT
Co-axial
cable
digital
output.
(For
some
units,
they
are
only
made
provision for future upgrade,
please
contact your dealer or distributor if you
have problem).
3. DVD DIGITAL INPUT (24/192)
(OPTION)
Once MD5501 module is installed in
XCD, you will be able to connect
digital output of your DVD player to the
input in order to enjoy high sound
quality
by using
the
up-sampling
feature of MD5501 to up-sample
the
digital signal
to 24bit/192KHz
and
then use one of the highest
quality
DAC installed
in XCD to make
it
possible
for you to enjoy
highest
possible sound quality from your DVD
player.
4. USB INPUT (Computer,
Gamer)
(OPTION)
Once MD5501 module is installed in
XCD, you will be able to connect USB
output
of your computer
or Game
Console to the input in order to enjoy
high sound quality by using the up-
sampling
feature
of MD5501 to up-
sample
the
digital
signal
to
24bit/192KHz and then use one of the
highest quality DAC installed in XCD
to make it possible for you to enjoy
highest
possible
sound quality from
your computer or game console.
5. USB OUTPUT (OPTION)
Once MD5501 module is installed in
XCD, you will be able to hook up other
equipment
with USB to XCD through
the USB OUTPUT connector.
Please
note USB is two-way system. So, you
will be either send digital signal from
XCD to the other equipments
or from
other equipments
into XCD through
the USB connector. The digital signals
output from the USB connector can be
from Computer or Game Console that
is hooked up to USB input connector
or from CD of the XCD.
6. AC Selector
(115V or 230V)
The AC Selector will be set to the AC
Power voltage
of your country from
factory. But in case if your XCD is not
received
directly from factory or you
move from one country to the other,
the AC selector
might
De set
at
different
voltage.
So,
before
plug
power cord into your wall AC outlet,
please
always check
if the Voltage
selector
set to the voltage
of the
country you will use XCD or not and
set to correct voltage.
When the AC
Selector set to 115VAC, the XCD can
be used in countries
with AC Power
Voltage
between
110V and
120V.
When the AC Selector set to 230V, the
XCD can be used in countries with AC
Power
Voltage
between
220V and
240V.
7. AC
RECEPTACLE
The AC RECEPTACLE is for you to
plug in with power cord attached in the
packing or you can plug in with other
power cord with your preferences.
5