Amcrest ATC-801 Посібник користувача - Сторінка 13
Переглянути онлайн або завантажити pdf Посібник користувача для Цифрова камера Amcrest ATC-801. Amcrest ATC-801 15 сторінок. Digital game & trail hunting camera
Друкувати сторінку
and photos/recordings are taken almost continuously. The maximum interval is 30
minutes. This means the PIR will be disabled for 30 minutes after each trigger. The default
value is 1 second.
The following shows how to set the PIR Triggering Interval Time to 1 minute provided
that the previous option is 1 second.
a) Press MENU to display the settings menu.
b) Press LEFT or RIGHT to select the Camera menu.
c) Press DOWN then OK to select Interval.
d) Press DOWN to select 1 minute or desired interval.
e) Press OK to save the current setting, then press menu to return to info display.
Press MENU return to the info display without saving the settings.
4.1.16 Timer
This parameter defines a certain time period, in a 24 hour format, during the day
when the camera can be triggered. The rest of the time the device is shut off. The effective
value of the hour ranges from 0 to 23 while the minute ranges from 0 to 59.
Provided that you want the camera to work from 8:00AM to 5:00PM, the steps are
as follows:
a) Press MENU to display the settings menu.
b) Press RIGHT to select the Setup menu.
c) Press DOWN then OK to select Timer.
d) Press RIGHT/LEFT to select a field and press UP or DOWN to change the value until
the start time changes to 8 and the stop time changes to 17.
e) Press OK to save the current setting, then press menu to return to info display.
Press MENU return to the info display without saving the settings.
4.1.17 Enter Password
If the password setting is set to On, after switching on the camera, the LCD screen on
the camera will prompt to enter the password. The default password setting is off. It can
be changed by the following steps:
a) Press MENU to display the settings menu.
b) Press RIGHT to select the Setup menu.
c) Press DOWN then OK to select Password.
d) Select On, press OK, then press RIGHT to select 4 numbers as a password.
e) Press OK to save the current setting, then press menu to return to info display.
f) The LCD screen will prompt to enter password next time you switch on the camera.
Press MENU return to the info display without saving the settings.
4.2 Playback
In playback mode, images and videos can be viewed and deleted. The images and
videos can be viewed on the LCD screen on the camera or the TV monitor connected to
camera with the TV cable. For simplicity, operations with the PC won't be introduced here.
4.2.1 Viewing Photo or Video
a) Switch to TEST mode and enter into the info display.
b) Press RIGHT to view the latest picture (or video) on the LCD screen on the camera
or TV monitor.
c) Press LEFT to start playing the video being viewed.
d) Press LEFT again to pause the video.
e) Press UP to view the previous picture (or video) and DOWN for the next.
f) Press OK to return to info display.
When viewing images, the total number of all images in the SD-card and the index of
the displaying image will be shown respectively.
4.2.2 Delete Photo or Video
The operations are as follows:
a) Press RIGHT to display Photos and Videos.
b) Press MENU and then DOWN to select Delete.
c) Press OK then DOWN/UP to select delete current or delete all.
d) Press OK. Cancel and OK are prompted.
11