Amcrest ATC-801 Посібник користувача - Сторінка 14

Переглянути онлайн або завантажити pdf Посібник користувача для Цифрова камера Amcrest ATC-801. Amcrest ATC-801 15 сторінок. Digital game & trail hunting camera

Друкувати сторінку

e) Press OK to delete the image or video.

Press Cancel to cancel. Then press MENU then OK to return to info display.

Please note that after deleting a picture or a video file, the deleted files cannot be

restored. Furthermore, in order to delete all the images and video clips in the SD-card, it

is suggested to format the SD-card through the settings menu.

4.3 Laser Pointer

The laser pointer is especially useful when it is somewhat dark as an additional

function for pointing to an object or a certain region of interest.

Press * to turn on the laser light in TEST mode and use the tilt adjuster on the back

of the camera to adjust the angle for taking photos/videos.

NOTE: The laser pointer can be harmful to an individual's eyes, therefore please avoid

pointing the laser pointer at other individuals.

4.4 File Numbering

Images and videos are saved as DCIM (Digital Camera Images) separately saved in a

pre-named folder (100MEDIA). File number increases as new photos or videos are taken.

The file name is similar to PTDC0001.JPG or PTDC0001.AVI. Through the suffix you can

distinguish whether the file is an image (with suffix.jpg) or a video (with suffix.avi).

4.5 Firmware Upgrade

This camera is equipped with an automatic firmware upgrade function. Upgrading is

needed only when an improved firmware is available. To update firmware, follow the

below steps:

1. Unzip the update file.

2. Copy the FW18NA.bin to an SD card.

3. Insert the SD card into the camera.

4. Power on the camera into Test Mode.

5. The camera will read the SD card and update itself automatically. When updating

the camera, the screen will be black.

6. The screen will light up after the update is finished.

7. Turn the camera off.

8. Remove the SD card, then insert it into a pc, and delete the FW18NA.bin file on

the SD card. (If you don't do this, the camera will try to update again when it is powered

on.)

9. Insert the SD card into the camera like normal. The camera should have the latest

firmware installed at this point.