Air & Allied Sales MP55AK Інструкція з експлуатації - Сторінка 7
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Інструменти Air & Allied Sales MP55AK. Air & Allied Sales MP55AK 11 сторінок. Air nipper
・The exchange method of a main part C(22),a piston B(23), and a return spring(10')
(1) Intercept an air source of supply.
(2) Remove an air hose from a main part. (Refer to Fig. 1)
(3) Remove the main part A(①) and the main part B(②). (Let me rotate counterclockwise.)
※Keep in mind that a piston may jump out at this time.
(4) Carry out the grease rise of the new inside of a main part C(22),and the O ring portion (O ring(⑭),O ring(21)).
(5) Carry out the grease rise of the O ring portion of a new piston(23) (with O ring(11')).
(6) Put a new return spring(10') into the main part C.
(7) Put in the new piston(23) which carried out the grease rise, fasten the main part A and the main part B,
and be crowded complete.
※1.In exchange of the main part C, take the dirt of the existing piston(23),
carry out a grease rise at the O ring portion,
and include in the existing spring.
2.In exchange of only a spring, clean the existing main part C and piston,and include O ring portion
in the existing after grease rising.
3.In exchange of only a piston, clean the existing inside of a main part finely,and incorporate with the
existing spring after a grease rise.
※Grease rise part
・The inside of main part C
※Recommendation lubricant (grease rise) : Shell Alvania Grease RA-J
・O ring(⑭) portion of main part C ・O ring(21) portion of main part C ・O ring portion of Piston B
7/11
Air & Allied Sales (Pacific) Pty Ltd
www.air-allied.com.au