Air & Allied Sales MP55AK Buku Petunjuk - Halaman 7

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Peralatan Air & Allied Sales MP55AK. Air & Allied Sales MP55AK 11 halaman. Air nipper

・The exchange method of a main part C(22),a piston B(23), and a return spring(10')

(1) Intercept an air source of supply.

(2) Remove an air hose from a main part. (Refer to Fig. 1)

(3) Remove the main part A(①) and the main part B(②). (Let me rotate counterclockwise.)

※Keep in mind that a piston may jump out at this time.

(4) Carry out the grease rise of the new inside of a main part C(22),and the O ring portion (O ring(⑭),O ring(21)).

(5) Carry out the grease rise of the O ring portion of a new piston(23) (with　O ring(11')).

(6) Put a new return spring(10') into the main part C.

(7) Put in the new piston(23) which carried out the grease rise, fasten the main part A and the main part B,

and be crowded complete.

※1．In exchange of the main part C, take the dirt of the existing piston(23),

carry out a grease rise at the O ring portion,

and include in the existing spring.

2．In exchange of only a spring, clean the existing main part C and piston,and include O ring portion

in the existing after grease rising.

3．In exchange of only a piston, clean the existing inside of a main part finely,and incorporate with the

existing spring after a grease rise.

※Grease rise part

・The inside of main part C

※Recommendation lubricant (grease rise) ：　Shell Alvania Grease RA-J

・O ring(⑭) portion of main part C ・O ring(21) portion of main part C ・O ring portion of Piston B

7/11

Air & Allied Sales (Pacific) Pty Ltd