ASTi Sound+Sleep ASM1002 Посібник користувача - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник користувача для Засоби особистої гігієни ASTi Sound+Sleep ASM1002. ASTi Sound+Sleep ASM1002 8 сторінок. Adaptive sound sleep therapy system
Також для ASTi Sound+Sleep ASM1002: Посібник користувача (12 сторінок), Посібник користувача (12 сторінок)
Друкувати сторінку
G
S
ETTING
TARTED
Inside the package you'll find:
1. This Owner's Manual
2. A Sound Environments Guide
3. A Sound+Sleep
4. An AC Power Adapter and Cable
Sound+Sleep Owner's Manual
Connect to an AC Outlet
The power jack is located on the bottom of
the Sound+Sleep.
1. Push the power adapter plug at the end
of the cable into the jack.
2. Slip the cord under the rubber foot by
separating the two pieces of the foot
along the slit.
3. The machine should sit flat on a table or
nightstand if the cord is installed
correctly. The slit should easily separate
by running your finger down it. If not, you
can use a knife to cleanly open the slit.
Next, connect the AC plug into an un-
switched wall outlet. The first time you plug it
in, it may take up to 30 seconds to perform a
self-test. Please note that the ten painted
dots around the dial do not light up.
We recommend that you do not use an
outlet connected to a switch. Your
Sound+Sleep automatically remembers its settings each time it's
turned off using the POWER button, but it may not remember its
settings if it loses power.
You may use the Sound+Sleep internationally with any AC line
voltage from 100–240 Volts, at 50 or 60Hz, using an AC plug
adapter (available at many electronics and travel stores).
astisupport.com