ASTi Sound+Sleep ASM1002 Посібник користувача - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник користувача для Засоби особистої гігієни ASTi Sound+Sleep ASM1002. ASTi Sound+Sleep ASM1002 8 сторінок. Adaptive sound sleep therapy system
Також для ASTi Sound+Sleep ASM1002: Посібник користувача (12 сторінок), Посібник користувача (12 сторінок)
Друкувати сторінку
U
S
+S
SING YOUR
OUND
Turn it on and select a sound
Press the POWER button and the Sound+Sleep will initialize and
start playing in about two seconds. The Sound+Sleep may be
turned off with the POWER button, or the TIMER button (see Sleep
Timer).
The Sound+Sleep will retain the last settings used when you last
powered it off using the POWER button. If you power it off by
unplugging the Sound+Sleep power adapter from the wall outlet,
the settings may not be saved.
Next, use the dial to select a sound category, and then press the
RICHNESS button to choose between the three sound
environments in that category.
See the included Sound Environments Guide, or the sound listings
later in this guide, for a complete list of sound environments.
Use the VOLUME buttons to adjust the volume to your liking.
Not all the sound environments are designed for sleep. Some
environments are designed for relaxation, speech privacy,
meditation, or studying and reading.
Sound+Sleep Owner's Manual
F
T
LEEP THE
IRST
IME
Adaptive Mode
The Sound+Sleep can adapt to noise in your environment. It uses its
built-in microphone on the front panel to listen for disruptive
noises, and raises the volume and/or adds enhancing sounds to
the sound environment to compensate. Press the ADAPTIVE button
to turn it on or off. The lamp next to the ADAPTIVE button will
indicate when it's active.
When Adaptive Mode is not active, your Sound+Sleep will maintain
a steady volume level.
Adaptive Mode allows the Sound+Sleep to be customized to suit
your personal preferences and situation. You might prefer a quiet,
steady sound, especially if there is little noise, or steady noise, in
your environment. Or, you might need the additional noise masking
that Adaptive Mode provides. Experiment to find the setting you
like best for different situations.
Note: When setting the volume in Adaptive Mode you are actually
setting the maximum volume it can reach when it detects a loud
noise. If the sound seems too low when it is quiet in your room, turn
the volume up to a higher base level.
M
U
F
ORE
SEFUL
EATURES
Sleep Timer
The Sleep Timer can be used to set the Sound+Sleep to play for a
number of minutes and then shut off gradually and automatically.
The time interval can be set to 30, 60, 90, or 120 minutes by
pressing the TIMER button.
astisupport.com