Akva SUBSEA FEEDER Посібник користувача - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник користувача для Рибальське спорядження Akva SUBSEA FEEDER. Akva SUBSEA FEEDER 20 сторінок.

4 INSTALLATION

PROTECTIVE GEAR REQUIREMENTS

Wearing floating garments is mandatory when working on or by the sea.

After completing SJA, and if measures have been introduced for the transport to and

from the cage may be carried out in a safe manner, work can be commenced.

Before commencing the installation process, site manager and owner and site manager are

responsible for ensuring that everyone who installs and/or uses the AKVA Subsea Feeder is

informed of and understands the contents of this manual before commencing the installation.

Before using the feeder, check all components for potential damages caused during storage or

transportation. Never place a damaged unit inside a pen.

Before commencing the installation, check that the pump is in the correct vertical position and

the AKVA Subsea Feeder is positioned upright.

The feeder is supplied with the relevant equipment for installation. Control wether the delivery

note corresponds with the amounts and sizes of the materials supplied, such as:

bolts

hose clamps

wrenches

loading straps

pump with hose

hex wrench for hose clamps

In rough weather (waves and strong currents), the AKVA Subsea Feeder must be moored at a

45-degree angle against the weather direction, as shown in illustration 6:

Subsea Feeder 45 degrees against the weather

Illustration 6:

Mooring the AKVA Subsea Feeder 45 degrees against the weather direction

direction.

DOCUMENT NO:

DC10000901

Mooring the AKVA

DOCUMENT PART:

REVISION NO:

10001800