Canon PIXMA MP750 Посібник користувача

Переглянути онлайн або завантажити pdf Посібник користувача для Принтер "Все в одному Canon PIXMA MP750. Canon PIXMA MP750 2 сторінки. Photo multifunction printer
Також для Canon PIXMA MP750: Додатковий посібник (6 сторінок), Посібник із швидкого старту (49 сторінок), Посібник із швидкого старту (48 сторінок)

Друкувати сторінку

Thank you for purchasing the Canon PIXMA MP780/750. To prepare your machine for use, please follow these

Easy Setup Instructions before referring to any other documentation.

IMPORTANT

Do not connect the USB cable until after the software is installed. See the rear side of this sheet for details.

Unpack and install the machine.

Check the package contents.

• Machine

MP780

MP750

• Ink tanks

Black

BCI-3eBK

• Easy Setup Instructions • Quick Start Guide

• Setup CD-ROM

The Setup CD-ROM contains the MP Drivers, as well as the User's Guide, Software Guide and Photo

Application Guide in electronic format. Please read these guides.

• In this sheet, illustrations of MP780 are shown.

• A printer cable is not included. You must purchase a USB cable (less than 16 3/8 ft.) to connect your

machine to a computer.

Connect the telephone line. (MP780 model only)

Connect the telephone line and any necessary external device.

For details, see the Quick Start Guide.

Connect the telephone

line cord to the wall jack.

You can connect an external

device (telephone or answering machine) if necessary.

Connect the power cord.

1. Connect one end of the power cord to the rear of the machine.

2. Connect the other end to the AC outlet.

If the message <PUT IN CARTRIDGE> appears, go to Step 4, "Install the print

head."

Install the print head.

Press the Open Button to open the

Paper Output Tray. Then lift the

Scanning Unit until it locks into place.

IMPORTANT

Be sure to hold the Scanning Unit firmly with one

hand.

Open the two Inner Covers.

(2) The Print Head Holder moves to the center.

(3) Install the print

head here.

(1) Open the two

Inner Covers.

Prepare the print head.

Do not touch!

Remove the protective cap and discard it.

Start Here

Easy Setup Instructions

• Power cord

• Telephone line

• Print head

Black

BCI-6BK

Cyan

BCI-6C

Magenta BCI-6M

Yellow

BCI-6Y

Connect external devices as follows:

External device jack

Telephone line jack

Telephone or answering machine

Telephone or

Telephone

answering machine

Machine

line

Built-in computer modem and telephone

LINE TEL

Telephone

Machine

Computer

line

Lift the Scanning

Press the Open Button.

Unit.

Click

Pull

the Scanning

Unit Lever.

Raise the lock lever.

Touch only the lock lever!

Raise this securely.

Insert the print head.

(2) Push back.

(1) Insert.

Lower the lock lever.

Install the ink tanks.

Prepare the ink tanks.

Remove the orange-colored

protective film. If it is not

removed completely,

problems with printing

may occur.

Insert the ink tanks.

Click

Push it in until locks

into place.

Close the Inner Covers and the Scanning Unit.

Click

Close the two Inner Covers.

Load the paper.

Open the Auto Sheet Feeder.

Load two sheets or more of letter-size plain paper.

(1) Open the Auto Sheet

Feeder.

(2) Pull out the Paper

Support until it stops.

Align the print head from the Operation Panel.

Be sure to align the print head to ensure print quality.

Press [OK] to start print head alignment.

(1) This message appears.

ALIGN PRINT HEAD

PRESS [OK]

If this message

does not appear

after closing the

Scanning Unit,

see "Aligning

The Print Head

Automatically"

in the Quick Start

Guide.

If the printed pattern matches the illustration, print head alignment is complete.

You can change the language displayed on the LCD.

For details, see "Selecting The Language For The LCD" in the Quick Start Guide.

You have completed installation and alignment.

If you are connecting the machine to a computer for use, see the rear side of this sheet for

instructions on installing the software.

All other products and brand names are registered trademarks or trademarks of their respective owners.

Specifications subject to change without notice.

HT7-0029-000-V.1.0

xx2004A

Click

Lower the lock lever

until you hear a click

as it locks into place.

Remove the protective cap

and discard it.

Do not touch!

Good example

Bad example: Tank 6BK is

not fully inserted.

Make sure to press it down

firmly.

Click

Pull the Scanning Unit Lever

towards you to close the

Scanning Unit.

IMPORTANT

Be sure to hold the Scanning Unit firmly with one hand.

Load the paper with the print side face up.

Pinch and adjust

the paper guide

to the width of

the stack.

Ensure the paper stack

does not exceed the paper limit mark.

(2) Press [OK].

(3) The machine will print

the print head position

pattern and automatically

align the print head.

PRINTED IN CHINA