Canon Microfilm Scanner 500 Інструкція з експлуатації - Сторінка 30

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Сканер Canon Microfilm Scanner 500. Canon Microfilm Scanner 500 48 сторінок.

SPECIAL FEATURES

This section describes a number of special features offered by the

MS500.

This feature allows you to include the date on your prints. You

can choose from various date formats, and you can select the lo-

cation of the stamp on the print.

You can switch date stamping on or off by pressing the DATE

key on the keyboard. The lamp next to the key lights up to indi-

cate that date stamping is selected.

The following procedure explains how set the date, and how to

select the format and position of the date on the print.

The MS500 stores the settings in non-volatile memory,

so that they are retained even while power is off.

1. Hold down the DATE key for about 5 seconds. The DATE lamp,

Print Density display, and Print display all begin blinking, indi-

cating that you can now enter the date and time settings.

2. Check that the leftmost Print Density display is blinking. Then

press the plus or minus Print key as necessary to set the year.

Display

Setting

1951 to 1999

2000 to 2050

3. Press the right Print Density Adjustment key once to switch to

month selection. Then press the plus or minus Print key to enter

the month.

Display

Setting

January to December

4. Press the right arrow key again to switch to day selection. Then

press the plus or minus key to set the day-of-month value.

Display

Setting

1st to 31st

5. Press the right arrow key once more to switch to hour selection.

Press plus or minus to set the hour.

Display

Setting

0 to 24