- ページ 30
スキャナー Canon Microfilm Scanner 500のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Canon Microfilm Scanner 500 48 ページ。
ページを印刷する
SPECIAL FEATURES
SPECIAL FEATURES
This section describes a number of special features offered by the
MS500.
Date stamp feature
This feature allows you to include the date on your prints. You
can choose from various date formats, and you can select the lo-
cation of the stamp on the print.
Switching the date stamp on or off
You can switch date stamping on or off by pressing the DATE
key on the keyboard. The lamp next to the key lights up to indi-
cate that date stamping is selected.
Doing the date settings
The following procedure explains how set the date, and how to
select the format and position of the date on the print.
The MS500 stores the settings in non-volatile memory,
so that they are retained even while power is off.
1. Hold down the DATE key for about 5 seconds. The DATE lamp,
Print Density display, and Print display all begin blinking, indi-
cating that you can now enter the date and time settings.
2. Check that the leftmost Print Density display is blinking. Then
press the plus or minus Print key as necessary to set the year.
Display
Setting
to
1951 to 1999
to
2000 to 2050
3. Press the right Print Density Adjustment key once to switch to
month selection. Then press the plus or minus Print key to enter
the month.
Display
Setting
to
January to December
4. Press the right arrow key again to switch to day selection. Then
press the plus or minus key to set the day-of-month value.
Display
Setting
to
1st to 31st
5. Press the right arrow key once more to switch to hour selection.
Press plus or minus to set the hour.
Display
Setting
to
0 to 24
26