COLDBUSTER FLOORHEATING CB Посібник користувача - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник користувача для Терморегулятор COLDBUSTER FLOORHEATING CB. COLDBUSTER FLOORHEATING CB 7 сторінок.

Instruction

The CB Manual thermostat control a floor heating system based on a built-in weekly program. You can set

individual temperatures for 4 events or 2 events on different days of the week. The default weekly program

parameters can satisfy most installations. If your living habits are different, you can update the weekly

program parameters in the thermostat or APP. Lowering the temperature when the home is

unoccupied will reduce your energy costs without reducing comfort. Furthermore, the thermostat features

an adaptive function that automatically changes heating period start times to ensure that the required

temperature is reached at the required time. After some days the adaptive function has learned when the

heating must be switched on.

Technical Specification

Supply voltage:

85-265 VAC 50/60 Hz

Load:

Max.16 A (resistive load)

Standby Power Loss: <1W

Cable Diameter:

1. Loosen the bottom screw with a Phillips

screwdriver. Then open the thermostat from

the right corner as shown.

Note: Screw the nut out of the groove. No need

to unscrew it

2. Wire as shown:

L/N lead:

Connect the power cord

using the terminal block.

Use a terminal block to

connect the load line.

L1/N1 lead:

Use a terminal block to connect the

load line.

COM/S1 terminal: Connect the floor sensor.

Note: Disconnect the main power supply before wiring

3. Install the back cover into the terminal box and

secure it with the set screw.

4. Install the back cover into the terminal box and

secure it with the set screw.

≤2.5mm²