Akyga AK-CA-38 Посібник користувача

Переглянути онлайн або завантажити pdf Посібник користувача для Адаптер Akyga AK-CA-38. Akyga AK-CA-38 4 сторінки. Pico power adapter

AK-CA-38

>95

Short description of the product

The Akyga® AK-CA-38 PICO adapter is intended to power mini-ITX motherboards.The product

provides maximum power of 120W, using only 12V power source with 5.5x2.5 mm plug. PICO power

module keeps full compatibility with ATX 24-pin motherboards. It is equipped with SATA, Molex and ATX

12V P4 connector that makes it compatible even with the newest generation processors.

The product is adapted to supply voltage in the range of 12V +/- 5%.

The power consumption of powering device can not exceed the power supply nominal current.

The product is compatible with the applicable national and European requirements.

What is in the box?

- AK-CA-38 PICO adapter

- P4, Molex and SATA cord

Symbols explanation:

There is a particular danger connected with service.

There is a risk of losing health or life (e.g. by electic shock).

Important tips and information.

The CE standard description on the product is the manufacturer's declaration that the marked

product meets the requirements of the directive so-called The "New Approach" of the European

Union (EU). For security and certification (CE) reasons, the device can not be rebuild or change in

any way. In the reason of using the power supply for other purposes than those described,

product may be demaged. The incorrect use may also cause hazard such as short-circuits,

burns, electric shocks, etc. Read the users manual carefully and keep it for later use. The product

could be share to third partie only with the user manual included.

Product accordance with the EU directive 2002/96/EC. The symbol of the crossed out basket

placed on the product means that the marked product can not be disposed of with other

household waste. After use, the product must be return to collection point for used electical and

electronic equipment or to the seller. Appropriate segregation of rubbish for subsequent

processing, recovery or descrution contributes to avoiding negative effects on the environment

and health, and also allows the recovery of raw materials from which the product is made.

The RoHS mark on the product is the manufacturer's declaration that the marked product meets

the requirements of the EU Restriction of Hazardous Substances (2002/95/EC) directive, which

aims to reduce the amount of hazardous substances penetrating into the environment from

electrical and electronic waste.

The device is intended only for domestic use, indoors.

GREEN

Ecological Solutions

www.akyga.com

the

p. 1