Akyga AK-CA-38 Посібник користувача - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник користувача для Адаптер Akyga AK-CA-38. Akyga AK-CA-38 4 сторінки. Pico power adapter

AK-CA-38 - user manual

Safety Precautions

Connecting computer components whose demanded power is greather than power of the adapter, can

cause damage (burn) of adapter.

The adapter should work in internal conditions that do not cause contact with water and direct sunlight.

During operation, the adapter should be located in a designated housing.

An electrostatic discharge occurs when two object touch each other, for example, an electric

charge that occurs when user touch metal door handle after walking on a carpet . Discharging

electrostatic charges from fingers or other electrostatic conductors can damage electronic

components. To avoid damaging the adapter or devices connected to it, abstain from touching

contacts, wires and electonic circuits. The user's contact with electronic components should be

kept to a minimum.

The manufacturer of the product is not responsible for damage or insults caused in effect

of disobey the safety instructions and informations contained in these user manual.

Keep the product and the packaging out of range of children and animals. The package

includes a foil that child could choke while playing.

It is forbidden to apply the mechanical load to the product - strong shocks, impacts, dropping or

crushing may cause its damage.

The product operation in adverse conditions is not allowed. Adverse conditions are primarily:

exposure to direct sunlight, high or very low ambient temperatures, strong vibrations, high

humidity, surrounds of gases, dusts or flammable and aggressive liquids.

If the product has been damaged, does not work properly or has been stored for a long period

of time in bad or unfavorable conditions, safe operation of the device is not possible. It is

essential to stop using the product and to protect it against re-use for security purposes.

Take account of the user manual for other devices connected to the adapter.

Product and power cord should not be touched with moist or wet hands under no

circumstances.

Short-circuiting the current connection is prohibited.

Make sure that the power cord is not crushed, bent, twisted, rubbed against sharp edges or

mechanically loaded in any other way. Avoid thermal load of the cable - in particular keep away

from heat sources (such as stoves, radiators, fireplaces).

Connection of adapter to electricity is made by connecting it to the 12V AC/DC power adapter.

Before connecting the adapter to the power supply, make sure that the power of the adapter is

sufficient for the components in the computer.

It is forbidden to connect the adapter directly to the car battery. This may be damaged the

adapter, causing threats to life, health and property.

Before connecting or conservation of the adapter make sure that the power cords are not live.

First connect adapter to computer components then connect adapter to AC/DC power adapter.

Never the other way around.

In case of any doubts regarding operation, safety or connection of the product, please contact

the manufacturer or a qualified specialist for this purpose.

All maintenance, adjustment and repair work on the product may only be carried out by a

qualified person in a specialist facility.

p. 2