Canor 8588008161760 Посібник користувача - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник користувача для Підсилювач Canor 8588008161760. Canor 8588008161760 7 сторінок. Integrated tube amplifier
Друкувати сторінкуRemote Control
Do not expose the sensors of your remote control to direct sunlight or to other strong light sources.
Remote control operates at an angle of 60 ° to about 5 meters. Aim your remote control at the sensor on the device.
There may not be any obstacles in the way between the sensor and the remote control.
If the unit is placed behind the glass, it may result in shortening the operating distance of the remote control
(according to the colour and strength of the glass).
The buttons on the remote control have the same function as the buttons on the front panel of the device.
The remote control is equipped with features for the amplifier and a CD player:
(amplifier/preamplifier features):
•
ON/OFF – turning on and off the amplifier.
•
DIMM – sets the display brightness in steps.
•
◄IN – input selector
•
IN► – input selector
•
- VOLUME + – volume control keys
•
MUTE – instant muting of the volume
(CD player features):
•
ON/OFF – turning on and off the amplifier.
•
DIMM – sets the display brightness in steps.
•
|<< BACKWARD – one short press jumps to
the beginning of a track. If playback time lasts
longer than 5 seconds, further pressing results
in jumping one track back. When pressed for a
longer time playback moves smoothly backwards.
•
>>| FORWARD – a short press skips one
track forward, when pressed for a longer time,
playback moves smoothly forwards.
•
►‖ – resumes and pauses CD playback
■
•
– ceases CD playback
•
INPUT – input selector
•
REPEAT – allows you to cyclically opt for single track repeat, entire disc repeat or disable repeat.
FRONT PANEL
•
VOLUME KNOB – amplifier volume control knob.
•
POWER - turning on and off the amplifier.
•
MUTE - an instant muting of the volume. Subsequent pressing results in default volume.
•
TR/UL - pressing this button switches between a triode and an ultra-linear mode.
Short press shows the selected mode („Triode" or „U-linear") on a display.
Repeated pressing selects the other mode. The default mode is Triode.
•
DIMM - sets the display brightness in steps. From a turned-off display to its maximum brightness.
After turning it on, the display is in its middle brightness level. In the state of a turned-off display during
operating the device with function keys the display lights up and after a few seconds, the display turns
off again.
•
1, 2, 3, 4 – input selector.
•
XM1, XM2 – input selector for monoblock mode only.