Baumer IO-Link RR30 Інструкція з експлуатації - Сторінка 13
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Аксесуари Baumer IO-Link RR30. Baumer IO-Link RR30 40 сторінок. Radar sensor
Друкувати сторінку
SSC Configuration
4.3.2
All SSC1 setting can be applied also in the same way to SSC2.
Channel Logic
4.3.3
Allows to change the output logic from Normally Open (NO, Normal) to Normally closed (NC, Inverted).
Single Point Mode
Figure 8 «Normal» or NO setting
The output is high, when the object is
-
within the range defined by the setpoints.
The output is low when the object is not
-
present our outside of the range defined by
the setpoints
Parameter name
SSC1 Config.Logic
Switching Mode
4.3.4
Figure 10 Single point
A single switch point (SP1) is defined at which the
sensor switches.
Parameter name
SSC1 Config.Mode
en_BA_RR30_IO-Link_V0.23.docx
13.01.2021/
Window Mode
Short Description
Selects the SSC logic. It can be
changed between "active if object
is present (normal)" or "inactive if
object is present (inverted)"
Short Description
Selects the SSC switch mode
13/40
Single Point Mode
Figure 9 «Inverted» or NC setting
The output is high when the object is not
-
present our outside of the range defined by
the setpoints
the output is low, when the object is within
-
the range defined by the setpoints
Rights
Unit / Allowed values
- Normal (NO) (Default)
rw
- Inverted (NC)
Figure 11 Window Mode
The sensor switches within a range defined by two
different setpoints (SP1 and SP2)
Rights
Unit / Allowed values
- Disabled
rw
- Single Point (Default)
- Window
Window Mode
Baumer Electric AG
Frauenfeld, Switzerland